Solar Victoria rebate round ends in 00d 00h 00m 00s Only 7 installer spots left this month

Automating Appliances to Run on Solar: Smart Plugs and Automation Options

How to automatically run dishwashers, dryers, pool pumps and other appliances during peak solar hours using smart plugs and scheduling, without a dedicated solar diverter.

Battery Updated October 2026 4 min read
Quick answer

If your solar system produces more electricity than you use during the middle of the day, the excess is exported to the grid for a small feed-in credit (typically 5 to 10 cents per kilowatt hour). If instead you run high-consumption appliances during that solar window, you consume your own solar at effectively zero marginal cost rather than buying that power at retail rates (typically 30 to 40 cents per kilowatt hour). The challenge is that most appliances do not know when solar is producing. This guide covers ways to schedule or automate appliances to run during peak solar hours.

Simplest Approach: Time-Based Scheduling

For most Australian homes, peak solar production occurs between approximately 10 AM and 2 PM on clear days (varying by season and panel orientation).

Simply setting appliances to run during this window captures most of the solar benefit:

  • Dishwasher: set delayed start to begin at 10 AM
  • Washing machine: set delayed start to begin at 10 AM
  • Clothes dryer: run manually or schedule to begin around 11 AM
  • Hot water boost: program heat pump or electric hot water to heat between 9 AM and 3 PM

Most modern appliances have a delayed start or timer function built in. Check the appliance manual.

Smart Plugs for Scheduling

For appliances without a built-in timer, a smart plug can add scheduling capability.

Recommended approach: use a smart plug with a built-in schedule function (not dependent on cloud connectivity) so the schedule runs even when internet is unavailable.

Brands with reliable scheduling: TP-Link Kasa, Meross, Arlec Grid Connect (from Bunnings).

Setup: plug the smart plug into the wall, plug the appliance into the smart plug, set a daily schedule in the accompanying app to turn on at 10 AM and off at 2 PM.

More Advanced: Monitoring-Triggered Automation

For tighter integration with actual solar production rather than fixed time schedules:

Some solar monitoring platforms have APIs or integration hooks:

  • SEMS+ (GoodWe): some community integrations available for home automation platforms
  • Solar Analytics: dedicated solar monitoring service with automation-friendly data access
  • Fronius Solar.web: Modbus TCP interface available for local data
  • iSolarCloud (Sungrow): limited API access

Home automation platforms (Home Assistant, with a solar-aware automation) can read real-time solar surplus data from compatible inverters and trigger smart plugs or smart switches when surplus exceeds a threshold. This is the most efficient approach but requires technical setup.

Note: AEU does not provide Home Assistant setup support. This is a third-party open-source platform.

Catch Power Relay for Large Appliances

For large appliances such as pool pumps or hot water heat pumps that cannot be plugged into a smart plug, the Catch Power Relay is a DIN-rail mounted relay that installs in the switchboard and is triggered by solar surplus detected via a CT clamp.

The relay sends an on signal to the connected appliance circuit when solar surplus exceeds a configured threshold and an off signal when surplus drops. This is the cleanest solution for loads that need hard-wired control rather than a plug-in smart plug.

Note: the relay turns the appliance on and off completely. It is NOT a variable power diverter and must not be used to modulate power to a heat pump compressor load.

What Does Not Work Well With Time Scheduling

Time scheduling works well for appliances with predictable run times: dishwasher, washing machine, dryer.

It works less well for appliances with variable demand: reverse cycle air conditioners (their power draw varies with conditions) and refrigerators (already cycling on their own schedule).

For hot water heat pumps, scheduling the heat pump itself to run during solar hours (not a diverter to it) is the right approach. See the Heat Pump Timer Programming guide.

When to Call AEU

Contact AEU on 1300 996 917 if:

  • You want a Catch Power Relay or similar device installed in your switchboard
  • You want to discuss solar diverter options for your specific hot water system
  • You want to understand your solar production profile to optimise scheduling

Related articles

Did this fix it?

If the fault is still there, lodge a ticket with your system type, install date and any fault code showing. A technician will call you within one business day.

Lodge a ticket →
Free · No obligation

Planning a new energy upgrade?

Tell us your postcode and what you are considering. We will confirm which rebates your property qualifies for and what comes off the price — no cost, no obligation.

Takes about 60 seconds
Rebates come off the price up front
One team from design to commissioning
Or call 1300 996 917
Check my rebate eligibility

Talk to our team about your property and the rebates that apply.

Call 1300 996 917 Send an enquiry →