A feed-in tariff (FIT) is the rate your electricity retailer pays you for every kilowatt-hour (kWh) of solar electricity you export to the grid. It appears as a credit on your electricity bill. The amount is set by your electricity retailer and can change. Current retail feed-in tariff rates in Australia are generally in the range of 5 to 12 cents per kWh depending on your retailer and state, though rates vary and change over time. Check your current bill or your retailer's website for the current rate offered to you.
Net vs Gross Feed-In Tariffs
Net feed-in tariff: You are only paid for the electricity you export to the grid after you have used what your house needs. This is the system used for most solar systems installed after 2012. Your meter records how much you export, and your retailer pays you for that amount.
Gross feed-in tariff: All electricity your solar system generates is fed to the grid and credited at the gross tariff rate, and you buy all your household electricity separately. Gross feed-in tariff arrangements were offered in some states (particularly Victoria) for early solar installations and paid much higher rates. Very few customers remain on gross feed-in tariffs today.
The Queensland 44 Cent Premium Feed-In Tariff
This is the most important exception in the Australian solar market. Customers in Queensland who had an eligible solar system connected to the grid before 30 July 2012 may still receive a 44 cent per kWh feed-in tariff rate from the Queensland government.
Critical warning: The 44 cent tariff is tied to the specific customer account and the specific solar system. You will lose it permanently and cannot get it back if you:
- Switch to a different electricity retailer (even temporarily)
- Upgrade or expand your existing solar system
- Add a battery storage system to your installation
- Change the inverter to a different model (in some cases)
- The property changes ownership and the new owner sets up a new electricity account
If you are in Queensland and are unsure whether you have the 44 cent tariff, check your electricity bill. It should show a feed-in tariff credit of 44 cents per kWh. If you have this tariff, speak to AEU before making any changes to your solar system or electricity account.
Victorian Solar Bonus Scheme (Expired)
Victoria had a premium feed-in tariff of 60 cents per kWh (later reduced) for early solar customers. This scheme ended on 31 October 2024. Customers who were on this scheme have now transitioned to standard market rates. If you were on the Victorian Solar Bonus Scheme, you will notice a significant reduction in feed-in credits on bills after October 2024. This is not an error. The scheme has legally concluded.
South Australia Premium Feed-In Tariff (Expired)
South Australia had a premium feed-in tariff scheme for systems installed before 30 September 2011. This scheme expired in September 2028 for the last remaining customers. If you are in South Australia and were on the premium scheme, check with your retailer about your current rate.
Why Your Feed-In Rate May Have Changed
Market feed-in tariff rates change because:
- Retailers review and adjust their voluntary FIT rates regularly (often annually)
- Your fixed rate agreement period may have ended
- You may have changed retailers
- Regulated minimum floor rates set by state governments change
You can often get a better rate by comparing retailers. Use the Energy Made Easy comparison tool (energymadeeasy.gov.au) for most states, or the Victorian Energy Compare tool for Victoria.
Your Export Data
The amount of solar you export is recorded by your smart electricity meter (if you have one). You can check export data:
- On your electricity bill (usually shown as total kWh exported and the credit amount)
- Through your retailer's online portal or app
- Through your solar monitoring platform (SEMS+, iSolarCloud, Solar.web, etc.) which also records export
If the feed-in tariff credit on your bill seems too low compared to what your monitoring app shows you exported, contact your electricity retailer first to check the metering data. If there is a persistent discrepancy, contact AEU to verify the CT clamp and meter configuration.
When a Smart Meter Is Required for Feed-In Tariff
To receive any feed-in tariff credit, your electricity meter must be a bi-directional (smart) meter capable of recording both import and export. If you have an old analogue meter that only spins in one direction, your exports are not being recorded or credited. Your retailer can arrange a meter upgrade. See the Smart Meter Upgrade article for more detail.


